(+971) 4 2247 951
E-mail : info@saifalkhaleej.ae

Fire Hose Reel

Fire Hose (Layout)

Material Discharge Type Size
Plastic Jet, Spray,Shutoff 1",3/4"
Brass Jet,Spray,Shutoff 1",3/4"
Nickle Chrome Plated Brass Jet,Spray,Shutoff 1",3/4"

Swing Type And Fixed Type

The Swing and Fixed type hose reel which is specially designed for surface mounted where access is limited or in a recessed cabinet are imported and supplied. The flexibility of the hose reel is high so that it can be used without alterations for mounting with inlet to left or right of reel. The hose reel is fitted with specially designed glandless type drip proof seals which have been subjected to a hydrostatic test pressure of 20 bar.

Automatic Type Hose Reels

In this model of hose reel, it has an internal valve which is open when the hose reel is unwindecl two turns allowing full flow of water.

General Description

Reel Plates: Made from 1.5mm thickness steel sheet and pressed in such a way to give a maximum rigidity. The reel plate edge is rounded to prevent sharp edges.

Hose: Made from natural rubber reinforced by double layer yarns, the outer and inner surface of the hose is smooth and seamless and can withstand a pressure up to 20 bar. Bursting pressure is 60 bar and above. The hose is available in both Red and Black color as required.

Hose reel nozzles are designed, tested and approved to meet International Standard. Nylon and ABS Material complies to ageing testing in accordance to IS04892-2.2. Throw range position at 0.6 m 30 deg. inclination, in accordance to En671-1 Clause 10.4. Flowrate meets the equivalent nozzle diameter of 6mm in accordance to En671 - 1.

Technical Specification

Hose Painting
Size Length Colour Working Pressure Test Pressure Bursting Pressure Super-finished high corrosive resistance Epoxy powder coated paints.
3/4" (19mm) 30mtr 45mtr Red/Black 10 20 60
1"(25mm) 30mtr 45mtr Red/Black 10 20 60

Home | About us | Products | Contact us | Sitemap
Copyrights reserved under www.saifalkhaleej.com